Reducing Flange Dimensions

Part#: PFDLW8x5T

Reducing slip on flange has an inside diameter to weld to an 5 inch OD mechanical tubing with bolt hole mounting pattern to fit a 8 inch class 150 ANSI flange.

Tube flange bolt hole pattern: ANSI, 150# flange

Tube flange Inside Diameter (ID): 5.06 inch

Tube flange Outside Diameter (OD): 13.5 inch

Tube flange Bolt Hole Center Diameter: 11.75 inch

Tube flange Bolt Hole Diameter: 0.88 inch

Tube flange Number of Bolt Holes: 8

Tube flange thickness: 0.5 inch

Tube flange ship weight: 16.6 lbs

Material: Carbon steel per AWWA C207-13 specifications

Flange style: Plate flange, flat face flange, ring flange, weld flange or slip on flange

These tube flanges have a phonographic finish face to provide excellent adhesion with gasket during installation. This steel tube flange is coated with a light weight oil for rust prevention.

This reducing flange welds onto a 5 inch mechanical tube and mates to a 8 inch class 150 flange. The two size reducing flange is also referred as a ring flange, weld flange, back up flange or slip on reducing flange. Reducing slip on flanges are used to transition a tubing system to a smaller size.