Reducing Flange Dimensions
Part#: PFDLW6x5T
Reducing slip on flange has an inside diameter to weld onto a 5 inch mechanical tubing with bolt hole mounting pattern to fit a 6 inch class 150 ANSI flange.
Pipe flange bolt hole pattern: ANSI, 150# flange
Pipe flange Inside Diameter (ID): 5.06 inches
Pipe flange Outside Diameter (OD): 11 inches
Pipe flange Bolt Hole Center Diameter: 9.5 incehes
Pipe flange Bolt Hole Diameter: 0.88 inches
Pipe flange Number of Bolt Holes: 8
Pipe flange thickness: 0.5 inches
Pipe flange ship weight: 12.5 lbs
Material: Carbon steel flange
Flange style: Plate flange, flat face flange, ring flange, weld flange or slip on flange
These pipe flanges have a phonographic finish face to provide excellent adhesion with gasket during installation. This steel pipe flange is coated with a light weight oil for rust prevention.
This reducing flange slips over and welds to a 5 inch outside diameter mechanical tubing. Flange's bolt hole spacing matches and mates to an ANSI class 150 6 inch flange. The reducing flange is also referred as a ring flange, weld flange, back up flange or slip on reducing flange. Reducing slip on flanges are used to transition a tubing system to a smaller sized tube.